Blog & News

BMW to fit Euro 7 engines to all new petrol and diesel models in Australia | AussieMotor

· 5 Views · 4 min read

BMW Australia will fit Euro 7-compliant engines to every new petrol and diesel model it launches here from now on, even though Australian rules do not require it. The commitment was confirmed on 20 November 2026 by BMW Australia's head of product, Brendan Michel, who said the company is "getting the latest EU7 emission standard engines out of Munich... for all of our new internal combustion engine models that we launch from now on".

What has BMW Australia confirmed?

The promise applies to new petrol and diesel models launched from now on, not automatically to every BMW already in showrooms. Buyers of those newly launched combustion models will get the same latest-generation engines BMW supplies in Europe, rather than an older specification that local rules would still allow.

BMW X5 SUV, front three-quarter view

1 / 9

Large SUVs such as the BMW X5, which is already on sale here in petrol and diesel form, show why the distinction matters. A model that has already been launched is not automatically covered just because newer BMWs will get Euro 7 engines. If you are buying a petrol or diesel BMW, ask the dealer whether the exact vehicle uses a Euro 7-compliant engine.

Does Australia legally require Euro 7?

No. Australia's current noxious-emissions rules for light vehicles are set at a Euro 6d-equivalent level. Newly approved light-vehicle models first supplied from 1 December 2025 must meet that standard. For models that were already approved and supplied before that date, the same standard applies from 1 July 2028 if the manufacturer wants to keep selling them after that date. The rules cover passenger cars, SUVs and light commercial vehicles up to 3.5 tonnes gross vehicle mass.

Australia has not announced a date for mandating Euro 7. In Europe, Euro 7 applies to newly introduced light-duty vehicles from 29 November 2026, and to all such vehicles from 29 November 2027. BMW is therefore bringing these engines to Australia ahead of any local legal deadline.

Measure

Australia

Europe

BMW Australia

Noxious emissions for newly approved light vehicles

Euro 6d-equivalent from 1 December 2025

Euro 7 from 29 November 2026

Euro 7 engines on new petrol and diesel models launched from now on

All new light vehicles

Euro 6d-equivalent from 1 July 2028

Euro 7 from 29 November 2027

The same Euro 7 engine commitment for newly launched combustion models

Euro 7 mandate

No date announced

As above

Voluntary, ahead of any Australian requirement

How does this relate to the NVES?

Euro 7 and the New Vehicle Efficiency Standard are not the same thing. Euro 7 is a noxious-emissions standard, covering pollutants such as nitrogen oxides, carbon monoxide and particles. The official Australian rules that implement the Euro 6d-equivalent limits do not set a cap on carbon dioxide (CO2).

The NVES, which began in 2025, is a separate scheme. It sets a fleet-average CO2 target for each manufacturer, with headline limits that tighten each year through to 2029. For Type 1 vehicles such as passenger cars and SUVs, those headline limits fall from 141g/km in 2025 to 117g/km in 2026, 92g/km in 2027, 68g/km in 2028 and 58g/km in 2029. The actual target for each brand is then adjusted for vehicle mass.

Fitting Euro 7 engines therefore does not, on its own, meet a manufacturer's NVES obligations, which are about average CO2 across the cars it sells. Brands also face tighter annual CO2 targets as the scheme steps down.

What does Euro 7 actually change for buyers?

The headline change is not a tougher limit on the main exhaust pollutants most people have heard of. Euro 7's limits for nitrogen oxides (NOx) and carbon monoxide (CO) are unchanged from Euro 6. The standard does add new limits on particles from brakes and tyres, tighter rules on smaller exhaust particles, longer periods over which exhaust emissions must stay in compliance, and expanded monitoring of vehicle efficiency.

That means a Euro 7 engine is not a guarantee of noticeably better fuel use, or of a step-change in tailpipe NOx, compared with a late Euro 6 engine. The practical benefit for Australian buyers is future-proofing: if Australia later adopts Euro 7, newly launched BMWs will already be using the engines designed for it, and they will match what BMW sells in Europe.

When does this start, and what else is coming?

Michel's wording is "from now on" for new internal combustion models being launched. It is a commitment about future petrol and diesel launches, not a claim that the entire current range has already switched. BMW also continues to sell plug-in hybrids and EVs, and has electric models including the i3, a new 3 Series and the iX4 due in Australia in 2027.

Tags

Tagged:New Cars
Category:Automotive News in Australia

Explore new models

View all new cars

Frequently asked questions

About the author

Waqas Afzal

By Waqas Afzal

Founder & Senior Automotive Editor

View profile

Founder and Senior Automotive Editor at AussieMotor, covering automotive news, new car launches, vehicle pricing, buying guides, reviews, and market insights. I oversee editorial quality, fact-checking, SEO, and content strategy, with a focus on providing accurate, practical information that helps car buyers make better informed decisions.

311 articles · Joined 2026

Editorial Policy · Corrections Policy

View All →