Blog & News

Regional speed limit cuts: what's changing in Australia | AussieMotor

· 6 min read

60km/h speed limit sign beside a rural Australian road

Speed limits are being cut on a growing number of regional roads in Australia, with the biggest drops in Western Australia, where some town approaches now go straight from 110km/h to 60km/h and 28 streets near Busselton are moving to 60km/h or 70km/h. There is no national change: the federal plan to lower the default limit on unsigned country roads was scrapped in November 2025, so the cuts are happening road by road, set by state road authorities after council requests and safety reviews.

That means the limit you knew on a familiar road may not be the limit today. Here is where limits are falling, why, and what drivers need to watch for.

Where regional speed limits are being cut

Western Australia is leading the current wave, but recent reductions have been made in New South Wales too.

Location

Old limit

New limit

Status

Dunsborough and Vasse streets, City of Busselton (WA)

110km/h

60km/h

Approved, signs to be installed soon, start date not set

Yallingup Siding streets, City of Busselton (WA)

110km/h

70km/h

Approved, signs to be installed soon, start date not set

Corrigin town approach (WA)

110km/h

60km/h, with no buffer zone

In place

Indian Ocean Drive approaches to the Cervantes Road intersection (WA)

110km/h

90km/h

In force from 30 October 2026

Section of Yarri Road, Kalgoorlie-Boulder (WA)

110km/h

80km/h

Confirmed September 2026

About 550 local roads, Shire of Augusta Margaret River (WA)

80 to 110km/h on most rural roads

70km/h on most, 80km/h on parts of Wallcliffe Road

Three-year trial since May 2025

Mitchell Highway, Dubbo to Wellington (NSW)

110km/h

100km/h

In force from 22 June 2026

Busselton, Dunsborough and Vasse

The City of Busselton asked Main Roads WA for lower limits after a council decision in January 2025. Main Roads has approved a 60km/h area limit for eight streets in Dunsborough, including Sloan Drive, Martina Drive and Wardandi Drive, and 13 streets in Vasse, including Belltonia Way, Red Gum Way and Whitemoss Drive. Seven streets in Yallingup Siding, including Summerville Crescent, Glover Road and Cowrang Lane, get a 70km/h area limit.

These are semi-rural residential streets that do not meet the definition of a built-up area, which is why WA's 110km/h rural default has applied to them. The new limits start once signs go up, and no date has been announced.

Town approaches without a buffer zone

The change most likely to catch drivers out is on the approaches to country towns. Main Roads WA has been removing the intermediate speed zones, such as an 80km/h section between 110km/h and 60km/h, since 2020. They are being replaced with "speed limit ahead" warning signs, so the limit can fall by 50km/h in one step.

Corrigin, about 230km east of Perth, is one example, and local authorities have raised concerns because the 60km/h zone starts in what still looks like open country. Main Roads says the approach makes WA more consistent with speed zoning elsewhere in Australia. In October, a 90km/h buffer zone was also removed at Latham in the Shire of Perenjori, where the road now changes directly between 110km/h and 70km/h.

Margaret River trial

The Shire of Augusta Margaret River and the RAC lowered limits on about 550 shire-managed roads west of Bussell Highway between May and August 2025. Most narrow, winding rural roads that had limits of 80km/h to 110km/h are now 70km/h, and peri-urban streets that were 70km/h or the 110km/h default dropped to 60km/h. State-managed arterial roads are not included.

Test drives before the trial found the lower limits added an average of 62 seconds across the routes driven. A 12-month review report is due to council in late 2026, and a full review including crash data is planned for autumn 2028.

New South Wales

Transport for NSW cut the limit on two sections of the Mitchell Highway between Dubbo and Wellington, totalling about 35km, from 110km/h to 100km/h from 22 June 2026. Its review found 38 crashes over five years, causing five deaths, and it estimated the lower limit could cut deaths on the affected sections by about 27 per cent.

Why speed limits are being lowered

Road authorities and safety groups point to the regional road toll. Nearly two-thirds of Australia's road deaths happen in regional and remote areas, even though most Australians live in the major cities, and the federal government says the risk of being killed on a regional or remote road is 11 times higher than in a major city.

In the South West of WA, the RAC says 195 people were killed or seriously injured on roads in the City of Busselton and Shire of Augusta Margaret River between 2019 and 2023, one of the highest totals in regional WA. The area's growing population and tourist traffic mean more people are using roads that were built for much quieter conditions.

There is Australian evidence behind the push. When South Australia cut the limit from 110km/h to 100km/h on about 1,100km of rural arterial roads in 2003, a ten-year evaluation found casualty crashes were 27.4 per cent lower than expected compared with roads that stayed at 110km/h.

Critics argue that fixing roads should come first. Regional drivers, the freight industry and some politicians strongly opposed the federal default-limit proposal, and many say a blanket cut would slow travel on roads that are safe at higher speeds.

Is the default speed limit changing?

No. The Office of Road Safety consulted on cutting the default limit on unsigned rural roads from 100km/h to 80km/h in late 2025, and received about 11,000 submissions. On 21 November 2025, federal, state and territory transport ministers agreed to do no further work on it, saying states are responsible for setting their own limits.

Default limits only apply where there is no speed sign. Outside built-up areas they remain:

State or territory

Default limit outside built-up areas

Western Australia

110km/h

Northern Territory

110km/h

New South Wales, Victoria, Queensland, South Australia and the ACT

100km/h

Tasmania

100km/h on sealed roads, 80km/h on unsealed roads

The debate has not gone away. Road safety researchers continue to call for a lower default of 80km/h or 90km/h on lower-standard undivided roads, backed by better-targeted speed camera enforcement.

What drivers need to know

  • The sign beats your memory. A new limit applies as soon as its signs are up, even if the road looks exactly as it did last month.

  • Watch for "speed limit ahead" signs in WA. On town approaches where the buffer zone has gone, start slowing at the warning sign so you are at the lower limit when you reach the speed sign.

  • Check your sat-nav. Mapping apps and in-car speed sign recognition can lag behind new limits, so treat them as a guide only.

  • Know your licence limits. Learner and P-plate drivers in some states have their own maximum speeds that apply even on 110km/h roads.

  • Towing and heavy vehicles. Lower limits apply to everyone. Heavy vehicles already have their own caps, and our NHVR speed limiter explainer covers how those are enforced.

Speeding penalties are also getting tougher in some states. Queensland has passed laws for an immediate six-month suspension for drivers caught 40km/h or more over the limit, which will start on a date still to be set, alongside its higher drug-driving fines from 1 December. In Tasmania, a Ferrari driver recently lost his licence after being caught at 150km/h, while Victoria's average speed camera expansion has stalled before the state election.

Tags

Category:Automotive News in Australia

Frequently asked questions

About the author

Waqas Afzal

By Waqas Afzal

Founder & Senior Automotive Editor

View profile

Founder and Senior Automotive Editor at AussieMotor, covering automotive news, new car launches, vehicle pricing, buying guides, reviews, and market insights. I oversee editorial quality, fact-checking, SEO, and content strategy, with a focus on providing accurate, practical information that helps car buyers make better informed decisions.

282 articles · Joined 2026

Editorial Policy · Corrections Policy

View All →